Laboratory Equipment

With our rich technical expertise and knowledge, we also offer Fume Hood that is designed to limit exposure to hazardous or noxious fumes, vapors or dusts. The negative pressure relative to exterior is maintained within the interior of the hood to prevent the emissions of hazardous and toxic vapours during experimentation procedures. Experimental procedures are performed within the hood which is consistently and safely ventilated, usually by means for extract blower and duckwork. Offered at highly competitive prices these instruments are perfect for Medical Laboratory, Research Institutes, Bio-tech and Pharmaceutical labs.

(Our portfolio of products also includes Hot Air Oven & Incubator Combined (twin Model) that consists of two chambers-upper and lower chambers. The lower chamber works as an incubator whereas the upper chamber works as an oven. It has a unique design of ventilation that prevent the surface of instrument from being burnt even when the equipment temperature maintained at 150 /200°C. Available at industry leading prices, these are used in Pharmaceuticals Units, Chemical Industries, Agriculture, Sterilization Food & Medical Industries, Bio Tech and other sectors.

• Two door- one for oven & one for incubator-in a single body
• Polish 304 grade Stainless Steel Sheet
• Fitted with Kanthal super quality Air Heater
• Best quality bi-metallic hydraulic thermostat/full feature temperature controller (on customer request)

We also present our valued clients with high quality Humidity / Stability Test Chamber that is coated with Mineral / Glasswool / Puf insulation that perfectly maintains the surface temperature and avoid heat loss. It is polished with 304 grade of Stainless Steel interior and is widely appreciated by our consumers for its durable finich, corrosion resistance and a longner service life.

• Tissue Culture
• Pharmaceuticals Units
• Agriculture
• Cable Industry
• Paper Industry
• PVC & Cement Industries
• Electrical Industries

• Silent hot air blower, unique design of air circulation & humidity circulation & improved temperature / humidity distribution
• Unique design of ventilation
• Kanthal A-1 tubular heater is fitted for better circulation
• Safety controller are provided with digital temp. controller cum indicator
• Kanthal A-1 steel tubular heater J shape is fitted in the steam Bath for long life & better result.
• Full feature with temp. controller i.e. thermostate bi-metalic capillary type for both dry & wet temp. control or digital temp. controller cum indicator & microprocessor based pid temp. controller cum indicator
• Choose among the models with window front glass door or inner perspex / acrylic sheet Door with full view to observe the test process inside the chamber while keep temperature uninterrupted
• Angle iron frame with castor wheel for easy movement (for refrigerated model )
• Fitted with 02 nos. fan for cooling & heating (for refrigerated model)
• Filled with 02 nos. circulation motor for water injection in routine model inside the control unit & chamber.
• Humidistate is placed inside the chamber to control requested humidity
• Humidity can be controlled by digital temp. & humidity (both automatically on customer requirement)
• Wet Temp. is controlled by bi-metalic thermostate connected to water bath placed in the control unit having water level. (nozzle for water inlet & outlet & overflow)

We have in offer a high quality Lab Rotary Vacuum Evaporator (Buchi), a device used in chemical laboratories for efficently removing solvents from samples by evaporation. This consists of an evaporating flask rotated by a non-sparking induction motor in a heating water bath. For speedily vacuum distillation, these are provided with a speed controller. Besides Vacuum Distillation, it is also used for vacuum drying of powders and slides.

• The evaporating flask, pear shaped to give a larger surface area for evaporation, is clamped to a glass duct which goes through the drive unit and protrudes 120 mm. into the condenser
• The condenser is screwed into the drive unit and contains a teflon inlet feed tube at its upper end
• Condenser is fitted with Standard B-19 joint at top and spherical joint S-35 at the bottom for receiver flasks
• Drive unit is equipped with F. H. P. motor, speed regulator
• Power: 220 volts A. C. 50 cycles, single phase
• Stand:- Heavy cast iron stand with steel rod
• Evaporating flask 1 liter ( approx.) with standard b-29 joint.glass duct all glass connector cone with b-29, connected evaporating flask and protrudes in the condenser with clip to hold the evaporating flask with glass duct
• Condenser double coil condenser for water circulation, fitted with vacuum
• Connection and standard S-35, ball joint for receiving flask with condenser
• Receiving Flask: 1 liter capacity with standard s 35 ball joint
• Ball Joint Clamp:- To hold the receiving flask with condenser
• High Vacuum Cock:- Two way stop-for the feeding tube and vacuum release

CAT No. PSW –

Invalid Air Cushions (Circular) Red Rubber with metal air valveAvailable Sizes 30 cm. (12”), 35 cm. (14”), 35 cm. (14”), 46 cm. (18”), 50 cm. (20”)

……...For more information Submit Enquiry Form with Product name and code: